Apple iPhone/iPhone 3G (User manual) - Manual (Page 132)

132 Appendix A Troubleshooting
If that doesn’t work, erase all content on iPhone. See “  Resetting iPhone” on
page 109.
If that doesn’t work, restore the iPhone software. See “
 Updating and Restoring
iPhone Software” on page 141.
“This accessory is not made to work with iPhone” Appears
Make sure the dock connector is free of debris.
If you connect iPhone to an accessory not specifically made for it, iPhone may ask
if you want to turn on airplane mode. This is to eliminate radio interference from
cellular signals coming from iPhone. You may be able to use iPhone with the accessory
whether or not you turn on airplane mode. However, the accessory may not charge
iPhone.
If you turn on airplane mode, you won’t be able to make calls, send or receive
text messages, access the Internet, or use Bluetooth devices with iPhone until you
disconnect iPhone from the accessory or turn off airplane mode.
“This accessory is not supported by iPhone” Appears
The accessory you attached may not work with iPhone. Make sure the dock connector
is free of debris.
Connect-to-iTunes Screen Appears
iPhone needs to be activated. Connect iPhone to your computer and open iTunes if it
doesn’t open automatically.
iPhone Is Too Warm
If the interior temperature of iPhone 3G exceeds normal operating temperatures, you
may experience the following as it attempts to regulate its temperature:
iPhone stops charging 
display dims 
weak cellular signal 
temperature warning screen appears 
Important: You cannot use iPhone while the temperature warning screen is displayed
except to make an emergency call. If none of the above measures succeeds in
lowering the internal temperature, iPhone automatically goes into a deep sleep mode
until it cools. You cannot make an emergency call when iPhone is in this mode. Move
iPhone to a cooler location and wait a few minutes before trying to use iPhone again.