AGFA ePHOTO 1280 - Manual (Page 58)

Camera Care and Maintenance (cont.)
◗ To clean the camera lens or LCD screen, blow away any surface dust or dirt. Then breathe
on the lens to form a mist and gently wipe it with a soft, lint-free cloth or lens cleaning
tissue.
◗ To avoid scratching the lens, use a gentle, circular motion when wiping.
◗ If necessary, clean battery contacts with a dry cloth before installation.
◗ If condensation develops inside the camera, stop using it immediately. Leave the camera
at room temperature for a few hours to allow the condensation to evaporate.
◗ Do not disassemble or attempt to repair the camera yourself. Refer all servicing to your
local Agfa dealer .
System Requirements
IBM PCs and Compatibles
◗ 486 processor (Pentium ® recommended)
◗ Windows 95 or Windows NT (3.51 or later)
◗ 16 MB RAM
◗ 50 MB available hard disk space
◗ VGA monitor with support for at least 256 colors
◗ 2x CD-ROM drive (required for installation)
◗ 9-pin RS-232C serial port
58