AEG KRC 4350 BT - Manual (Page 38)

English
38
Bluetooth Function
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (
Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (
Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (
Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Press the FUNC button (2) repeatedly, until “– – – – bt”
is shown on the display. The lines in the display will flash.
These signal that the device is in pairing mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device “KRC 4350 BT” will
show in your player as a selection.
NOTE:
Only one playback device may be connected to the
device at one time. If the device is already connected
to another playback device, then the device will not
appear in the BT selection menu.
4. Now enter the password “0000” in your player, depend-
ing on the device manufacturers, model, and software
version.
If pairing has been performed successfully, then the notifica-
tion “– ON – bt” will appear in the display. For the further
procedure, please refer to the user manual of the playback
unit. If possible, adjust the volume of the external unit to a
comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-
saving mode. Deactivate the energy-saving mode as
it can otherwise result in problems during the data
transfer through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music recei-
ves a call, the music will be interrupted. The notification
“CALL bt” will appear in the display. Accept the call
on your mobile phone. The sound will be played back
through the radio. At the bottom of the radio there is
a small hole for the microphone. Speak towards the
microphone or transfer the call to your mobile phone.
When doing this, please refer to the fade-in on the
display of your mobile phone. After you have ended
the call, the devices are connected to each other again
and playback continues.
Description of the operating buttons for Bluetooth
NOTE:
Your Bluetooth playback device has to support the follow-
ing functions.
PRESET (10)
You can pause and continue music playback. Press again to
continue playback.
TUNE- (11)
Press 1 x =
Restart of the song from the beginning.
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song.
TUNE+ (11)
Press to skip to the next song and the following songs.