AMD EMBEDDED MOTHERBOARD LE-363 - Manual (Page 23)

LE-363 User’s Manual Hardware Setup
Connector: CN_LCD
Type: onboard 2 x 20-pin header with housing, pitch=2.0mm
Pin Signal Pin Signal
1 ENAVDD 2 ENBKL
3 GND 4 GND
5 LCDVCC 6 LCDVCC
7 GND 8 GND
9 FPD0 10 FPD1
11 FPD2 12 FPD3
13 FPD4 14 FPD5
15 FPD6 16 FPD7
17 FPD8 18 FPD9
19 FPD10 20 FPD11
21 FPD12 22 FPD13
23 FPD14 24 FPD15
25 FPD16 26 FPD17
27 FPD18 28 FPD19
29 FPD20 30 FPD21
31 FPD22 32 FPD23
33 N/C 34 N/C
35 FPCLK 36 VSYNC
37 RM 38 HSYNC
39 GND 40 GND
To setup the LCD, you need the component below:
1. A panel (support up to 18-bit/24-bit color) with TTL or LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find a
local cable manufacture to make cables.
Onboard Display Interface 23