AEG SKS51200F0 - Manual (Page 31)

1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do the following steps:
50 mm min.
200 cm 2
min.
200 cm 2
Installation 31