AEG EWA7800 - Manual (Page 17)

17
D
GR
NL
F
GB
Getting started
1. Place the machine on a flat surface.
When starting the machine for
the first time, fill the tank with
cold water. Press the Option button
twice. The display will show “AUTO
CLEAN”. Press the Set button to
confirm. Let a full tank of water pass
through the machine once or twice
to clean it, without using coffee.
3. Insert the permanent coffee filter
in the filter holder and fill it with
ground coffee. For average strong
coffee one measuring spoon (ap-
prox. 6-7 g) per cup is sufficient.
Close the water tank lid and place
the jug (complete with lid) onto the
warming plate.
2. Making coffee: open the lid and fill
the water tank with fresh cold water
up to the desired level.
Note: The water tank is removable.
There is a gauge for cups on the water
tank and on the coffee jug (for the
Coffee maker with Glass jug only).
The machine must not be used
with empty tank!
GB
4. Start brewing coffee instantly:
Press the Brew button. If you want
to pause the brewing, press the
Brew button again. When the brew-
ing process is finished the appliance
will enter keep warm mode (for
the Coffee maker with Glass jug
only).
5. Press the Cancel button to stop a
selected operation, the appliance
will enter standby mode.
Note: Press and hold the Cancel but-
ton for two seconds to turn off the
display.
6. If the jug is removed, the filter
valve prevents coffee from dripping
onto the warming plate.
While boiling, the jug must not
be removed for longer than 30
seconds or the filter will overflow.