Audiovox TV4 - Manual (Page 4)

Installing Your TV4
Connecting your TV4
There are two ways to connect your TV4. This will depend
on your model of television.
For Televisions with One 75 Ohm Input for VHF and UHF:
1. Connect the coaxial cable from your TV4 to the
“F” connector input marked VHF/UHF on your TV.
See Fig.1.
For Televisions with Separate 75 Ohm
VHF and UHF Inputs:
1. Attach the band separator (included) to the coaxial
cable attached to your TV4.
2. Screw in the VHF connector from the band separator to
the VHF input on your TV or VCR.
3. Attach the 300 ohm twin wire from the band separator
to the two screws marked UHF. See Fig.2.
TV4
3 VHF/UHF
Fig. 1
VHF
UHF
Fig. 2
Band
Separator