Brother DCP-353C - Manual (Page 8)

Setting Up the Machine
6
STEP 1
8
While holding the paper tray in place, pull out
the paper support until it clicks, and then
unfold the paper support flap .
Note
Do not use the paper support flap for Legal size
paper.
Note
You can use the photo paper tray which is located
on the top of the paper tray to print on photo
10
×15 cm and photo L size paper.
For details, see Loading photo paper in Chapter 2
of the User’s Guide.
3 Connecting the power cord
1
Connect the power cord.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Warning
The machine must be fitted with an earthed plug.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
4 Choosing your language
1
After connecting the power cord, the LCD
shows:
Select Language
English
Français
Deutsch
Nederlands
Italiano
Press a or b to choose your language and
press OK.
2
Choose Yes or No and press OK.
English
Yes
No
If you set the wrong language, you can
change the language after setting the date
and time. (For details, see Changing LCD
language in Appendixes B of the User’s
Guide.)