Britax P222000 User Manual
Page 12
Checking Buckle Position
20
21
NOTE:
This section does not apply when
ISOFIT is used.
The position of the vehicle belt buckle can
affect the stability of your Expressway. In
an accident this could prevent your
Expressway from protecting your child as
well as it should.
If, when the lap belt is properly tightened, the
buckle lies in the position marked as wrong
( ), then try moving the Expressway to
another seating position in your vehicle.
If it is not possible to achieve the correct
position for the buckle, then another seating
position MUST be used.
If the buckle's tongues cannot be inserted
properly (if click is not heard), press the
red button on the buckle to release,
then re-insert tongues.
Periodically clean the buckle to ensure
proper operation. Refer to "Cleaning
the Buckle" on page 26 for instructions.
Using Recline Positions
NOTE:
The appearance of the
chest clip may vary.
Open the chest clip by squeezing
the middle tab(s).
IMPORTANT:
The correct height
for the chest clip is at the middle
of the chest, level to the armpit.
Always make sure that the har-
ness is tight before each use or
after any adjustments.
Using the Chest Clip
Using the Puzzle Buckle
The Expressway has a choice of two positions for your child's comfort.
It can be used in either awake or sleeping position. Both are tested
and approved.
Pull the recline release handle,
then slide the base of the seat into
the desired position. Let go of the
release handle and be certain that
your Expressway has locked into
place.
Awake
Sleeping