AEG HC652600EB - Manual (Page 20)

The appliances put together are live.
• Obey the electrical safety rules.
• The Rated voltage of the appliances put together must agree.
• Adjust the plug and socket connections together correctly.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the connections in the clamps correctly.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Assembly
min.
50mm
min.
50mm
min.
500mm
min.
5mm
=
=
490 +1mm 560 +1mm
600
mm
R 5
mm
min.
38 mm
min.
5 mm
20 Installation instructions