AEG A42200GSW0 - Manual (Page 21)

3. OPERATION
3.1 Control panel
0
1 2 3 4 5
1 Green Indicator Light
2 Red Indicator Light
3 Temperature Regulator
4 Half Loaded position
5 Full Loaded position
3.2 Switching on
Leave the appliance to stand upright for
4 hours after installation.
Insert the plug into the wall socket.
1. Turn the Temperature Regulator
clockwise to the Full Loaded
position.
The Green Indicator Light will light up
and remain lit until the appliance is
switched off.
2. Leave to run for 8 hours to allow the
correct temperature to be reached
before placing food inside.
The Red Indicator Light will stay on
until the correct temperature is
reached.
3. When the appliance has reached the
set temperature (the Red Indicator
Light has gone out) adjust the
Temperature Regulator according to
the quantity of the stored foods.
A few hours after starting up
the Red Indicator Light will
go out to show that the
correct temperature has
been reached for the setting
chosen and will stay out to
indicate that everything is in
order. It will come on if the
freezer temperature rises
unduly for instance, after
opening the freezer door or
placing food inside the
cabinet, but the light should
go out again when the
temperature returns to the
correct storage level.
3.3 Switching off
1. To turn off the appliance, turn the
Temperature Regulator to the "O"
position.
2. To disconnect the appliance from the
power, disconnect the mains plug
from the wall socket.
3.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
ENGLISH 21