AEG PS 254 - Manual (Page 23)

19
GB
TECHNICAL DATA
Mitresaw*
PS 254 L
Production code 4406 71 01...
4406 81 01...
... 000001-999999
Rated input 220-240 V, 50 HZ, S6(40%),
2000 W, 8,3 A
No-load speed 4500 min -1
Saw blade dia. x hole dia 254 x 30 mm
Saw blade thickness 1,8 mm
Max. cutting width
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
90 x 305 mm
90 x 215 mm
50 x 305 mm
50 x 215 mm
Max. height
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
90 x 305 mm
90 x 215 mm
Min. workpiece dimensions 130 x 35 x 2,5 mm
Weight according EPTA-Procedure 01/2003 19,5 kg
Noise/Vibration Information
Measured values determined according to EN 61029.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
97,3 dB (A)
110,3 dB (A)
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
h
Sawing of wood
Uncertainty K=
2,4 m/s 2
1,5 m/s 2
*PS
= ^ Mitresaw
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
English