Beko WM 6133 W - Manual (Page 20)

20 EN
program is started by pressing the
“Start/Pause/Cancel” button after
making the time delay selection.
C More laundry may be loaded/
removed during the time delay
period.
Changing and canceling the time
delay.
1. Press the “Start/Pause/Cancel”
button to switch the machine to
“Pause” mode.
2. Press “Start/Pause/Cancel” button
to start the program after making the
new time delay selection.
C In the event that any of the lights
of 3-6-9 options does not light up
after selecting the new time delay,
it means that time delay function is
cancelled.
Starting the Program
1. Press “Start/Pause/Cancel” button to
start the program.
2. “Start/Pause/Cancel” button will light
up to indicate that the program has
started.
3. The door is locked and the “Ready”
light fades.
Progressing a program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will illuminate
and the light of the completed step
will turn off. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried
out.
The “Wash” light on the program follow-
up indicator illuminates when “Start/
Pause/Cancel” button is pressed after
selecting the washing program. “Spin”
lamp will light up at the final spin step.
The “Ready” lamp will light up again
when the program is over and the door
is unlocked.
You can put your machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button when it is operating. In
this case, “Start/Pause/Cancel” light will
flash.
C If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of unbalanced distribution of laundry
in the machine.
Changing the program after
the program has started
You can use this feature after your
machine has started to wash different
textile groups in the same batch
of clothes under higher or lower
temperatures.
For example;
Press and hold the “Start/Pause/
Cancel” button for 3 seconds to
“Cancel” the program in order to
select “Cottons 40” program instead of
“Cottons 60” program.
Select the “Cottons 40” program by
rotating the program knob.
Press “Start/Pause/Cancel” button to
start the program.
C The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
while the machine is operating. You
must cancel the ongoing program
in order to change the washing
program. (See, Canceling a Program)
Selecting or cancelling an auxiliary
function/temperature/spin speed
1. Press the “Start/Pause/Cancel”
button to switch the machine to
“Pause” mode.
2. Change the auxiliary function’s
temperature and spin speed.
3. Press “Start/Pause/Cancel” button to
start the program.
C The selection to be made must be
appropriate. For example, if your
machine is on the main wash cycle,
you may select additional rinse
auxiliary function, but you cannot
select pre-wash.
C The spin speed and temperature
which are selected first will keep
on being valid even if the position
of the spin speed or temperature
selection knob is changed. Press