Installation instructions, 1 built-in appliances, 2 connection cable – AEG HG654320NM User Manual

Page 28

Advertising
background image

Problem

Possible cause

Remedy

comes on.

The Automatic Switch
Off operates.

Deactivate the appliance
and activate it again.

comes on.

The Child Safety Device
or the Lock function op-
erates.

Refer to the chapter “Dai-
ly Use”.

and a number come

on.

There is an error in the
appliance.

Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect it again.
If

comes on again,

speak to the service cen-
ter.

If you tried the above solutions and can-
not repair the problem, speak to your
dealer or the customer service. Give the
data from the rating plate, three digit
letter code for the glass ceramic (it is in
the corner of the glass surface) and an
error message that comes on.

Make sure, you operated the appliance
correctly. If not the servicing by a cus-
tomer service technician or dealer will
not be free of charge, also during the
warranty period. The instructions about
the customer service and conditions of
guarantee are in the guarantee booklet.

8. INSTALLATION INSTRUCTIONS

WARNING!
Refer to "Safety information"
chapter.

Before the installation

Before the installation of the appliance,
record the information below from the
rating plate. The rating plate is on the
bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................

8.1 Built-in appliances

• Only use the built-in appliances after

you assemble the appliance into cor-

rect built-in units and work surfaces
that align to the standards.

8.2 Connection cable

• The appliance is supplied with the

connection cable.

• Replace the damaged mains cable

with a special cable (type H05BB-F
Tmax 90°C; or higher). Speak to your
local Service Centre.

28 www.aeg.com

Advertising