Brinkmann 810-4415-T - Manual (Page 30)

Step 21
Insert grease tray into opening on
backside of grill. Make sure to slide
tray onto tracks as illustrated.
Step 22
Hang grease cup under the grease
tray as illustrated.
Step 23
Place the heat distribution plates on
lower level of grill body assembly
directly above burners.
Step 24
Place cooking grills on support ribs
directly above heat distribution
plates.
Step 25
Place warming rack in slots above
cooking grills.
Step 26
Remove igniter cap and insert battery
with positive end of battery toward
igniter cap. Ensure spring is in place
inside igniter cap. Replace igniter
cap and make sure the igniter is
working properly.
29
Warming Rack
Cooking Grills
Heat Distribution
Plates
Igniter Cap Battery
Grease Tray
Grease Cup