Olympus FE-360 - Manual (Page 26)

26 EN
Creating panoramic images [ PANORAMA]
K CAMERA MENU X PANORAMA
n/D: P f h
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master 2
software on the provided CD-ROM.
An Olympus xD-Picture Card is required for panoramic shooting. Cards by other manufacturers do
not support panoramic shooting.
Panoramic shooting is not available using a microSD card in the microSD Attachment.
The focus, exposure (p. 19), zoom position (p. 19), and [WB] (p. 25) are locked at the fi rst frame.
The fl ash (p. 19) is fi xed to $ (FLASH OFF) mode.
1 Use klmn to select the direction that the frames are combined.
2 Press the shutter button to take the fi rst frame, and then compose the second shot.
The part of the previous picture where it will be joined to the next picture does not remain in the frame. You
have to remember what the part in the frame looked like and take the next picture so it overlaps.
3 Repeat Step 2 until the number of required frames is taken, and then press the B button
when done.
When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is
possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images.
●
Selecting the focusing on a face
[ FACE DETECT]
K CAMERA MENU X FACE DETECT
n/D: P f h
Submenu 2 Application
OFF
The camera does not focus on
a face.
ON *1
This is used for taking pictures of
people. The camera automatically
detects and focuses on a face.
*1 For some subjects, the frame may not appear or
may take some time to appear.
Shooting with P or h [ C P/AUTO]
C P/AUTO
n/D: f h
If you select [C P/AUTO] when h mode or
f mode has been set, the mode will change
to P or
h.
book_FE360_en.indb 26 book_FE360_en.indb 26 6/23/2008 5:27:36 PM 6/23/2008 5:27:36 PM