Olympus Stylus Verve - Manual (Page 34)

Changing ISO sensitivities
34
1
Taking
Pict
ure
s
Press or to select a desired
ISO sensitivity and press the OK/
MENU button.
The selected ISO sensitivity is set.
Press the OK/MENU button again to exit
the menu.
Take the pictures.
The higher ISO sensitivity setting you select, the higher noise level the
picture has.
The ISO sensitivities are measured based on silver-halide films but the
figures are approximate.
When [ISO] is set to [AUTO] and a picture is taken in a dark place without
using the flash, the camera automatically sets to a high shutter speed in
order to avoid camera shake.
When [ISO] is set to [AUTO] and the subject is so far as the flash light does
not reach it the camera automatically raises the ISO sensitivity.
ESP/
n
ISO
DIGITAL ZOOM
AF MODE
DRIVE 64
AUTO
200
400
100
CARD
SET
CAMERA