Troubleshooting, Operating problems – Olympus D-300 User Manual

Page 48

Advertising
background image

k

TROUBLESHOOTING

Symptom

Cause

Remedy

See

The camera

1

The power is OFF.

1

Open the lens cover to turn on the power.

P.20

does not work.

2

The batteries are loaded incorrectly.

2

Reload the batteries correctly.

P.19

3

The batteries are exhausted.

3

Replace the batteries with new ones.

P.19

4

The batteries are temporarily

4

Keep the batteries warm while using them.

unable to function.

No picture is

1

The flash has not finished charging

1

Remove your finger from the shutter release button

P.30

taken when

or the previous picture is being

and wait until the green lamp stops blinking.

the shutter

written into memory.

release button

2

Memory is full.

2

Check the number of remaining pictures on the

P.21

is pressed.

control panel and erase unnecessary frames using
the One-Frame Erase mode. Or transfer the pictures

P.37

to a computer, and erase the entire memory using
the All-Frame Erase mode.

The flash doesn’t

1

The flash mode is in the Off mode.

1

Set the flash mode to something other than

P.30

fire.

the Off mode.

The pictures

1

The lens cover is left open.

1

Close the lens cover and depress the LCD monitor

already taken can’t

ON/OFF (green button) to turn on the LCD monitor.

be displayed on

2

Memory is empty.

2

Check the number of remaining pictures.

P.21

the LCD panel.

Operating Problems

Advertising