Olympus LS-12 - Manual (Page 39)

2
Recor
ding
39
EN
Recording
Notes
• If you are unable to produce a clear recording with
this recorder even after adjusting the recording
level (
☞ P.31), this could potentially be because the
output level for the connected devices is too high
or too low. When external devices are connected,
perform a test recording and then adjust the output
level for the external devices.
• To record sounds from another device, connect to
the LINE IN jack. If you connect to the MIC jack, the
sound will distort and cannot be recorded properly.
Recording audio from this recorder with
▌
another device
Audio from this recorder can be recorded to another
device by connecting the audio input terminal
(microphone jack) of the other device and the EAR
jack of this recorder using the connecting cord KA333
(optional).
Recording audio from another device
▌
with this recorder
Audio can be recorded when you have connected
the audio output terminal (earphone jack) of another
device and the LINE IN jack of the recorder using the
connecting cord KA334 (optional) for dubbing.
To LINE IN jack
To audio output
terminal of other
device
To EAR jack
To audio input
terminal of other
device