Olympus D-230 - Manual (Page 78)

77
O
THER
FUNCTIONS
DISPLAYING IMAGE INFORMATION
This function enables you to display or not to display the image information
on the monitor while the image is played back. If you select [ON], the
information is displayed for 3 seconds. For details of the information
displayed, see “Monitor indications” (
p.8).
Image information display ON Image information display OFF
1
Close the lens barrier and
press the
button.
The camera turns on in the Play mode.
2
Press the button.
The monitor shows the Play menu.
3
Select [PLAY] using the /
buttons and press the
button.
4
Select [INFO] using the /
buttons and press the
button.
5
Select [ON] using the /
buttons and press the
button.
The image information is displayed
on the image.
Press the
button again to exit the
menu.
Note • The image information display setting returns to [OFF] (default
setting) when the clear settings value is [RESET] and the
camera is turned off. See “Clear settings” (
p.75).
• Only , and are displayed after 3 seconds,
regardless of whether image information display setting is set
to [ON] or [OFF].