Olympus mrobe 500 User Manual
Page 2
3'59
0'23
J.Smith/Best
list
So clean
J.Smith 4
21
Travel
J.Smith 5
01
Windy day
J.Smith 3
59
Tell me
J.Smith 4
30
3'59
0'23
J.Smith/Best
list
So clean
J.Smith 4
21
Travel
J.Smith 5
01
Windy day
J.Smith 3
59
Tell me
J.Smith 4
30
m:robe SETTINGS
LANGUAGE
DATE&TIME
BEEP
LCD
OFF TIMER
USB CONNECTION
VIDEO OUT
RESET ALL SETTINGS
OK
CANCEL
USB CONNECTION
ON
PRINTER
PC
C
A
B
B
Battery indicator
Setting up m:trip
Operating system requirements
The following systems are required for m:trip operation.
• OS: Windows 2000 Professional, Windows XP Professional/Home Edition
• CPU: Pentium III 500 MHz or later
• RAM: 128 MB or more (256 MB or more recommended)
• HD space: at least 200 MB (for installation)
• USB port: USB 2.0/1.1 (USB 2.0 (High Speed) recommended)
• Monitor: 800×600 dots or more, 65,536 colors or more (16,770,000 colors
recommended)
• CD-ROM drive
• Internet Explorer 6 or later
• Windows Media Player 9 or later
Tip
Operation is not guaranteed with OS upgraded computers.
Installing the Music/Photo Organization Software
“m:trip”
a
Turn on your computer and
insert the supplied CD-ROM
into the CD-ROM drive.
This screen appears.
Starting transfer
After you connect your m:robe to your computer, m:trip automatically runs.
Click [Start] in the screen, which is displayed by clicking [Sync.] in the
bottom right of the computer screen, to start transferring.
During transfer, the LED of the device fl ashes.
When transfer is complete, the LED goes off, and the “DO NOT
DISCONNECT!” message displayed on your m:robe changes to
“SYNCHRONIZATION COMPLETE IT IS SAFE TO DISCONNECT m:robe
FROM YOUR PC.”
Tip
You can set m:trip not to run automatically when connecting your m:robe and your
computer. For details, refer to the m:trip online Help.
Disconnecting your m:robe from your computer
a
Check that the “SYNCHRONIZATION COMPLETE IT IS SAFE
TO DISCONNECT m:robe FROM YOUR PC” message is
displayed on your m:robe.
b
Click the [Remove m:robe] button on the computer screen.
c
Take your m:robe out of the cradle.
When connecting your m:robe directly to the computer, disconnect the
dedicated USB cable from your m:robe.
Listening to music on your m:robe
The procedure to listen to music on your m:robe is explained in this section.
Connecting the remote and headphones
Connect the remote and headphones to the device as shown below.
Checking the battery
If the power is not turned on, press and hold POWER.
Check whether the battery is fully
charged with the battery indicator
displayed in the bottom left of the
“HOME” screen.
About the remaining battery
indication
The battery is fully charged.
/
Low battery.
The battery is empty. Charge the battery.
a
Insert an audio CD into your
computer.
m:trip automatically runs and this
screen appears.
Connecting to your computer
Connect your m:robe to your computer.
A
Connect the AC adapter to the cradle.
Connect the AC cord to the AC adapter, connect the AC adapter to the
DC IN 5V jack, and then plug the AC cord into a wall outlet.
B
Connect your computer and the cradle using the dedicated
USB cable.
Connect the connector with the arrow marks facing down to the USB
jack of the cradle.
C
Place your m:robe in the cradle.
Transferring music/photos from m:trip to your m:robe
Checking the USB CONNECTION setting of your
m:robe
Check that “USB CONNECTION” of your m:robe is set to “PC.”
a
Touch
in the bottom right
corner of the “HOME” screen.
The “m:robe SETTINGS” screen
appears.
Checking whether music has been transferred
Check whether music has been transferred to your m:robe properly.
Touch
on the “HOME” screen
to display the “MUSIC” screen.
This screen appears.
Tip
You can also connect your m:robe directly to the computer as shown above. When
connecting directly to the computer, check that the battery is fully charged.
Note
If your m:robe stops operating while communicating with your computer, your
computer may malfunction or data may be lost. We recommend using the AC
adapter when connecting to your computer.
Computer
To USB jack
To USB jack
Cradle
(supplied)
To PC
connecting jack
Tip
If the screen above does not appear after inserting the supplied CD-ROM,
click [My Computer] on the desktop (from the Start Menu for Windows XP),
double-click the CD-ROM icon and run the [Launcher.exe] fi le.
b
Click the [m:trip] button.
After the Install Wizard screen appears, follow the on-screen
instructions.
c
Click [Finish] when the Install Wizard Complete screen
appears.
Installation of m:trip is complete.
If you are prompted to reboot your computer after installation, reboot
your computer.
To run m:trip
Double-click the m:trip icon on the desktop.
After running m:trip, register your m:robe in the user registration screen.
Using the online Help
For details on operations and instructions for m:trip, refer to the online
Help.
To browse the online Help, click [Help] at the top of the screen.
Importing music/photos to m:trip
Importing music
You can import music from audio CDs.
When importing audio data from your audio CD, the fi le format will be
WMA.
Files cannot be imported as MP3 fi les with m:trip.
Tip
Run [m-trip] by selecting [start], [(All) Programs] and [OLYMPUS m-trip] if it
does not run automatically.
b
Click the [Import from audio CD] button on your computer
screen.
Importing of the audio CD starts.
Tips
• You can also import WMA or MP3 fi les already stored on your computer, or buy
audio fi les downloaded from the Internet. For details, refer to the m:trip online
Help.
• You cannot play back audio fi
les that are transferred using the software other
than m:trip, such as Windows Explorer. Use only m:trip to transfer audio fi les to
your m:robe. For details, refer to the m:trip online help.
Importing photos
Not only can you take photos and store them on your m:robe, but you can
also transfer image fi les already stored on your computer to your m:robe.
If you want to transfer the image fi les on your computer to your m:robe,
import them to m:trip before transferring. For details on how to import the
fi les, refer to the m:trip online Help.
b
Touch “USB CONNECTION.”
The “USB CONNECTION” screen
appears.
c
Check that “PC” is selected.
If “PC” is not selected, touch “PC.”
d
Touch “OK.”
The “m:robe SETTINGS” screen reappears.
To return to the “HOME” screen
Touch
in the bottom right corner of the screen.
If the list of tracks is displayed on the screen above, music has been
transferred properly.
Playing back music
a
Touch the track selecting from
the list of “MUSIC” screen
using
(down) or
(up).
The selected track is highlighted.
b
Touch .
Playback starts.
To stop playback
Touch
.
For further details on operations and functions, refer to the supplied
manuals.
To Remote
/Headphones jack
AC adapter
(supplied)
To a wall
outlet
To DC IN 5V
jack