Olympus SP-550 UZ - Manual (Page 56)

56
EN
Usi
ng OLYMPUS Mast
er
Macintosh
1
Insert the CD-ROM into the CD-ROM drive.
• The CD-ROM window is displayed.
• If the CD-ROM window is not displayed, double-click the CD-ROM
icon on the desktop.
2
Double-click the “Setup” icon on the desktop.
• The OLYMPUS Master installation screen is displayed.
• Follow the on-screen instructions.
• When the OLYMPUS Master licensing agreement is displayed,
read the agreement and click “Continue” and then “Continue” to
proceed with the installation.
• The screen confirming that installation is completed is displayed.
• You must restart your computer before using OLYMPUS Master.
1
Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
2
Connect the multi-connector on the camera to
the USB port on the computer using the
provided USB cable.
• Refer to your computer’s instruction manual to locate the
position of the USB port.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB
connection is displayed.
3
Select [PC] and press o.
4
The camera is recognized by the computer.
• Windows
When you connect the camera to your computer for the first
time, the computer attempts to recognize the camera. Click
“OK” to exit the message that is displayed. The camera is recognized as a “Removable Disk”.
Connecting the camera to a computer
Monitor
Connector cover
Multi-connector
OK
[ I N ]
SET
U S B
PC
EASY PRINT
CUSTOM PRINT
EXIT
d4321_e_unifild_Print_00_bookfile.book Page 56 Tuesday, December 19, 2006 11:20 AM