Olympus E-P1 - Manual (Page 117)

117
EN
10
Pr
int
ing
Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is available,
you cannot change the setting.
[SIZE]
Sets the paper size that the printer
supports.
[BORDERLESS] Selects whether the picture is printed
on the entire page or inside a blank
frame.
[PICS/SHEET] Selects the number of pictures per
sheet. Displayed when you have
selected [MULTI PRINT].
Selecting pictures you want to print
Select pictures you want to print. The selected pictures can be printed later (single-frame
reservation) or the picture you are displaying can be printed right away.
[PRINT] (
f) Prints the currently displayed
picture. If there is a picture that
[SINGLE PRINT] reservation
has already been applied to,
only that reserved picture will
be printed.
[SINGLE PRINT] ( t) Applies print reservation to the
currently displayed picture. If
you want to apply reservation to
other pictures after applying
[SINGLE PRINT], use
hi to
select them.
[MORE] ( u) Sets the number of prints and other items for the currently displayed
picture, and whether or not to print it.
For operation, refer to “Setting printing data” (
gP. 118) in the next
section.
PRINTPAPER
STANDARD STANDARD
SIZE BORDERLESS
BACK SET
PRINTPAPER
SIZE PICS/SHEET
STANDARD 16
BACK SET
SINGLEPRINT
SELECT
MORE
PRINT
123-3456 123-3456
15 15
s0019_e_00_0_unified.book Page 117 Friday, April 24, 2009 9:21 AM