Olympus DS-4000 - Manual (Page 45)

45
3
Setting Option Item
1
1 Press the NEW button while in STOP
mode.
When programmed into the recorder, the Option
Item ID displays.
2 Use the alphanumeric characters set
displayed to set the Option Item ID.
Characters that can be entered are from 0 to
9, from A to Z, and _.
Entering method
Press the FF/REW button:
Navigate through the character set.
Press the MENU button:
Enter the highlighted character and go on
to the next character.
Press and hold the MENU button:
Finish entering ID.
Press the ERASE button:
Erase the characters being entered.
If multiple Option Items are programmed into the recorder, each
Option Item ID is entered in the same way described above.
When entering the final ID is done, the recorder switches to NEW
mode.
..............................................................................................................
Notes
• Each Option Item ID field can accept up to 20 characters maximum.
• If more than one Work Type ID exist on the recorder, the Option Item ID
displays after determining the Work Type.
Setting Option Item
PAT I ENT NO
7_
3 4 5 6 7 8 9 0 A B
The recorder can be programmed with additional user defined fields called Option Items.