Recording sound with still pictures – Olympus IR-300 User Manual

Page 54

Advertising
background image

54

4

Add

it

ion

al

sh

oo

ti

n

g

f

unc

ti

o

n

s

Recording sound with still pictures

Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.

Top menu

[MODE MENU]

[R]

[ON] / [OFF]

g“Using the menus” (P. 18)

1

Take the picture.

• When recording starts, aim the camera

microphone at the source of the sound
you want to record.

TIPS

• H is displayed when still pictures and movies with sound are played back.

During playback, sound is output from the speaker. The volume can be
adjusted.

g“Setting camera sounds” (P. 98)

• Sound can be added later to still pictures. Recorded sound can also be

re-recorded.

g“Adding sound to still pictures” (P. 64)

Note

• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not

be recorded properly.

• Pictures cannot be taken during sound recording.
• Sound recording is not possible in the following cases:

During sequential shooting, panorama, two-in-one pictures, and shooting
with a frame.

• Sound recording may also pick up camera noises, such as button operations,

shutter movement, etc.

• Sound recording may not be possible if there is insufficient space in the internal

memory or the card.

Microphone

Advertising