Shooting tips and maintenance, Shooting tips and information – Olympus E-PL1 User Manual

Page 89

Advertising
background image

89

EN

Shooting tips and maintenance

10

10

Shooting tips and information

The camera does not turn on even when a battery is loaded

The battery is not fully charged

Charge the battery with the charger.

The battery is temporarily unable to function because of the cold

Battery performance declines in low temperatures, and the charge may not be
suffi cient to turn on the camera. Remove the battery and warm it by putting it in your
pocket for a while.

No picture is taken when the shutter button is pressed

The camera has turned off automatically

To save battery power, if there is no operation, the camera goes into sleep mode
after a fi xed period of time and the camera stops operating. The camera activates
again when you touch the shutter button or any other button.

g “SLEEP” (P. 74)

After a further fi xed period of time has elapsed, the camera power turns off.

The fl ash is charging

On the LCD monitor, the

#mark blinks when charging is in progress. Wait for the

blinking to stop, then press the shutter button.

Unable to focus

When the AF confi rmation mark on the LCD monitor is blinking, it indicates that the
camera is unable to focus using AF. Press the shutter button again.

Noise reduction is activated

When shooting night scenes, shutter speeds are slower and noise tends to appear
in images. The camera activates the noise-reduction process after shooting
at slow shutter speeds. During which, shooting is not allowed. You can set
[NOISE REDUCT.] to [OFF].

g “NOISE REDUCT.” (P. 76)

The date and time has not been set

The camera is used with the settings at the time of purchase

The date and time of the camera is not set when purchased. Set the date and time
before using the camera.

g “Setting the date/time” (P. 7)

The battery has been removed from the camera

The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
cancelled more quickly if the battery was only loaded in the camera for a short time
before being removed. Before taking important pictures, check that the date and
time settings are correct.

Shooting tips and maintenance

S0027_E.indb 89

S0027_E.indb 89

2009/12/21 14:53:15

2009/12/21 14:53:15

Advertising