Olympus SP-570 UZ - Manual (Page 73)

EN
73
Gett
ing
to
kn
ow yo
ur ca
mera
bet
te
r
Movie
• If you use a non-Olympus card or a card used for another application, such as for a
computer, use [FORMAT] function to format the card.
g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P.52)
• An image or movie is being recorded or downloaded (when connected to a computer).
• Do not do any of the following while the card access lamp is blinking. Doing so may prevent
the image data from being saved and render the internal memory or card unusable.
• Open the battery/card compartment cover.
• Remove the battery and card.
• Disconnect the USB cable.
• Performing any of the following operations when not actually taking pictures can deplete
the battery power.
• The shutter button is pressed halfway repeatedly in shooting mode, activating the auto
focus and digital image stabilization.
• Using the zoom repeatedly.
• [FULLTIME AF] is set to [ON].
• The monitor is left on for an extended period of time.
• The camera is connected to a computer or printer.
• Some items may not be selectable from the menus when using the arrow pad. (Menu items
displayed in gray cannot be selected.)
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
When the focus mode is set to [MF], [AF MODE] cannot be selected.
• Some items cannot be set when the button is pressed.
[
%] and [#].
• The function settings cannot be changed when the mode dial is set to
g.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA]/[PRINT ORDER]/[FORMAT]/[BACKUP]
IMAGE SIZE FRAME RATE
Continuous recording length
Internal memory Using a 1 GB card
With sound
Without
sound
With sound
Without
sound
C 640 × 480
N 25 sec. 25 sec.
9 min.
25 sec.
9 min.
28 sec.
O 51 sec. 51 sec.
18 min.
44 sec.
18 min.
56 sec.
E 320 × 240
N
1 min.
9 sec. 1 min.
10 sec.
25 min.
26 sec.
25 min.
49 sec.
O
2 min.
16 sec.
2 min.
20 sec.
50 min.
7 sec.
51 min.
38 sec.
Using a new card
The card access lamp is blinking
Extending the useful life of the battery
Functions that cannot be selected from menus/buttons