Olympus XZ-2 - Manual (Page 83)

83 EN
Information
7
Pixel mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup device
and image processing functions. After using the monitor or taking continuous shots, wait
for at least one minute before using the pixel mapping function to ensure that it operates
correctly.
1
Select [Pixel Mapping] in c Custom Menu (P. 91) tab b.
2
Press I, then press Q.
• The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping
is fi nished, the menu is restored.
# Cautions
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.
Using a separately sold USB-AC adapter
The USB-AC adapter F-3AC (sold separately) can be used with this camera. Do not use any
AC adapter other than the dedicated one. When using F-3AC, be sure to use the USB cable
included with this camera.
Do not use any other AC adapter with this camera.
Using a separately sold charger
A charger (UC-90: sold separately) can be used to charge the battery.
Using your charger and USB-AC adapter abroad
• The charger and USB-AC adapter can be used in most home electrical sources within
the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the
country or area you are in, the AC wall outlet may be shaped differently and the charger
and USB-AC adapter may require a plug adapter to match the wall outlet. For details, ask
at your local electrical shop or travel agent.
• Do not use travel voltage converters as they could damage your charger and USB-AC
adapter.
Using the card
Cards compatible with this camera
SD/SDHC/SDXC/Eye-Fi card (commercially
available) (for compatibility card details, visit the
Olympus website.)
# Cautions
• This camera can be used without a card by storingimages in its internal memory.