Olympus E-PL2 - Manual (Page 68)

 EN
Sending and receiving images
6
6
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Before sending or receiving images, select [ON] for [
c/# MENU DISPLAY] >
[
# MENU DISPLAY] to make the accessory port menu accessible.
Sending images
Resize and upload JPEG images to another device. Before sending images,
make sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full
frame and press
Q.
2
Select [SEND A PICTURE] and press
Q.
Select [SEARCH] and press
Q in the next dialog.
The destination will be searched and displayed.
•
JPEG
<
<
SEND A PICTURE
m
ROTATE
Z
BACK SET
3
Select the destination and press
Q.
The image will be uploaded to the receiving device.
If prompted to enter a PIN code, enter the code for
the receiving device and press
Q.
•
•
INPUT PIN CODE
Please input PIN code.
0 0 0 0
SET CANCEL
Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1
Select [OLYMPUS PENPAL SHARE] in
the A tab of the accessory port menu
(P. 90).
2
Select [PLEASE WAIT] and press
Q.
Perform operations for sending images on the
sending device.
Transmission will start and a [RECEIVE PAIRING
REQUEST] dialog will be displayed. •
•
BACK SET
c
#
OLYMPUS PENPAL SHARE
OLYMPUS PENPAL ALBUM
ELECTRONIC VIEWFINDER
A
B
C
3
Select [ACCEPT] and press
Q.
The image will be downloaded to the camera.
If prompted to enter a PIN code, enter the code for
the transmitting device and press
Q.
•
•
INPUT PIN CODE
Please input PIN code.
0 0 0 0
SET CANCEL
Sending and receiving images