Olympus VN732PC - Manual (Page 40)

4
Recording menu [Rec Menu]
40
EN
Recording menu [Rec Menu]
TIP
• Increasing the setting number
increases the VCVA activation
sensitivity, enabling quieter sounds to
activate the start of recording.
• Adjust the VCVA voice activation level
to suit the recording conditions (to
cope with high levels of surrounding
noise or the like).
• To avoid recording mistake, it’s
recommended to perform a test
recording beforehand to adjust the
voice activation level.
NOTE
• The following function is disabled
when using the [VCVA] function:
• [Rec Scene] (
☞ P.23)
• [V-Sync. Rec]
Voice sync recording function
[V-Sync. Rec]
The voice sync recording function
automatically starts recording when a sound
louder than a preset voice sync recording
level (detection level) is detected, and
automatically stops recording when the
sound volume level decreases. When copying
music from another device connected to the
voice recorder, use the voice sync recording
function to detect the silent intervals
between music tracks and save each track as
a separate file.
VN-733PC and VN-732PC
models only
[1 sec.], [2 sec.], [3 sec.], [5 sec.]:
Set the detection time. The voice
recorder enters standby mode when
the input (recording level) is below the
preset level for at least the set detection
time.
[Off]:
Recording is done normally.