Olympus E-30 User Manual

Page 96

Advertising
background image

96

EN

7

Custom

izi

n

g your cam

er

a

Basic operations
[mode1]

For determining the metered exposure while focusing. AE lock is activated while
pressing the

AEL/AFL button, allowing you to adjust the focus and determine the

exposure separately.

[mode2]

For determining the exposure when you press the shutter button fully. This is
useful for shooting scenes with significant changes in lighting, such as on a stage.

[mode3]

For focusing with the

AEL/AFL button instead of the shutter button.

[mode4]

Press the

AEL/AFL button to focus, and press the shutter button fully to

determine the exposure.

AEL/AFL MEMO

You can lock and maintain the exposure by pressing the

AEL/AFL button.

[ON]

Press the

AEL/AFL button to lock and maintain the exposure. Press again to

cancel the maintaining of the exposure.

[OFF]

The exposure will be locked only while the

AEL/AFL button is pressed.

; FUNCTION

You can assign a function to the

< button.

[Fn FACE DETECT]

Press the

< button to set [g FACE DETECT] to [ON] and activate the optimal

settings. Press again to set it to [OFF].

g“Using the face detection function” (P. 38),

“g FACE DETECT” (P. 99)

[PREVIEW]/[LIVE PREVIEW] (electronic)

While holding down the

< button, you can use the preview function. When set to [LIVE

PREVIEW], pressing the

< button automatically switches the camera to live view for a

preview of the picture on the monitor.

g“Preview function” (P. 45)

[

V]

Press the

< button to acquire the WB value. g“Setting the one-touch white

balance” (P. 69)

[

P HOME]

Press the

< button to switch to the registered AF home position. Press the button

again to switch to the original AF target mode. If you turn off the camera while it is set to
the AF home position, the original position will not be stored.

g“Registering an AF

target mode” (P. 57)

[MF]

Press the

< button to switch AF mode to [MF]. Press the button again to switch to the

original AF mode.

[RAWK]

Press the

< button to switch from JPEG to JPEG+RAW or from JPEG+RAW to JPEG

for the record mode. You can change the record mode by turning the dial while holding
down the

< button.

[TEST PICTURE]

Pressing the shutter button while pressing the

< button enables you to check the

picture you have just taken on the monitor without having to record the picture to the
card. This is useful when you want to see how a picture turned out without saving it.

[MY MODE]

While holding down the

< button, you can take pictures using the camera settings

registered in the [MY MODE SETUP].

g“MY MODE SETUP” (P. 97)

[LEVEL GAUGE]

Press the

< button to display the level gauge in the viewfinder and on the control

panel, and press it again to hide the level gauge display.

g“LEVEL GAUGE” (P. 99)

[OFF]

Does not allow function allocation.

E-30_MASTER.fm Seite 96 Mittwoch, 3. Dezember 2008 1:56 13

Advertising