Olympus EM5 - Manual (Page 62)

62 EN
Other shooting options
2
Recording multiple exposures in a single image
(multiple exposure)
Record multiple exposures in a single image, using the option currently selected for
image quality.
1
Select [Multiple Exposure] in shooting menu X (P. 111).
2
Adjust settings.
Frame Select [2f].
Auto Gain
When set to [On], the brightness of each
frame is set to 1/2 and the images are
overlaid. When set to [Off], the images
are overlaid with the original brightness
of each frame.
Overlay
When set to [On], a RAW image
recorded on a card can be overlaid with
multiple exposures and stored as a
separate image. The number of pictures
taken is one.
• a is displayed in the monitor while multiple exposure
is in effect.
3
Take pictures.
• a is displayed in green when shooting starts.
• Press D to delete the last shot.
• The previous shot is superimposed on the view through
the lens as a guide to framing the next shot.
250 F5.6
ISO
400
L N
0.0 0.0 01:02:03 01:02:03
38 38
P
HD
% Tips
• To overlay 3 or more frames: Select RAW for [K] (P. 54) and use the [Overlay] option to
make repeated multiple exposures.
• For more information on overlaying RAW images: g “Image overlay” (P. 73)
# Cautions
• The camera will not go to sleep while multiple exposure is in effect.
• Photographs taken with other cameras can not be included in a multiple exposure.
• When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some functions
cannot be set.
• Multiple exposure is cancelled automatically from the first picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/Any
cable is connected to the camera
• When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
Multiple Exposure
Frame
Auto Gain
Overlay
Off
Off
Off
Set Back