Olympus SP-820UZ - Manual (Page 38)

38 EN
Resetting the fi le names of pictures Resetting the fi le names of pictures
dd [File Name] [File Name]
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM 100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering Automatic
numbering
Submenu 2 Application
Reset
This resets the sequential number for the
folder name and fi le name whenever a
new card is inserted.
*1 This is useful when
grouping images on separate cards.
Auto
Even when a new card is inserted, this
continues the numbering for the folder
name and fi le name from the previous
card. This is useful for managing all
image folder names and fi les names with
sequential numbers.
*1 The number for the folder name is reset to 100, and the
one for the fi le name is reset to 0001.
d Camera Menu 2
Adjusting the image processing Adjusting the image processing
function
function dd [Pixel Mapping] [Pixel Mapping]
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image processing
function starts.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
dd [ [s s]]
To adjust the monitor brightness To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing the
screen, and then press the A button.
MENU Back s