26 en, Taking pictures with [manual – Olympus TOUGH-8010 User Manual
Page 26
26 EN
3
Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter
automatically.
AUTO
AUTO
MENU
OK
SAVE
CANCEL
To combine only two pictures, press the
A button before taking a third frame.
4
Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the
m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
Taking pictures with [MANUAL]
1
Use
HI to specify at which edge the
next picture is to be connected.
MANUAL
MANUAL
1
2
1
2
MENU
BACK
Direction for
combining the
next frame
●
●
2
Press the shutter button to take the fi rst
frame.
1st frame
MANUAL
MANUAL
1
2
1
2
MANUAL
MANUAL
1
2
1
2
MENU
BACK
MENU
OK
SAVE
CANCEL
Joint areas
3
Compose the next shot so that joint area
1 overlaps joint area 2.
Composition of the 2nd frame
MANUAL
MANUAL
1
2
1
2
MENU
OK
SAVE
CANCEL
4
Press the shutter button to take the next
shot.
To combine only two pictures, press the
A button before taking the third frame.
5
Repeat steps 3 and 4 to take a third
frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the
m button.
●