Olympus DS-3500 - Manual (Page 32)

32
3
EN
In
d
e
x m
a
rk
s
Index marks can be placed into a file during
recording or playback. Index marks are used to
provide a quick and easy way to identify important
or significant parts within the file.
Setting an index mark
1 While the recorder is in recording mode
or in playback mode, press the
F3 (INDEX) button.
Locating an index mark
2 While playing back a file, press and hold
the
9 or 0 button.
• The recorder stops for 1 second when it
reaches the index mark.
Clearing an index mark
1 Select a file in which index marks you
want to erase are contained.
2 Press the
9 or 0 button to select
the index mark to erase.
3 While the index number appears for
approximately 2 seconds on the display,
press the ERASE button.
• The index mark is erased.
Notes
• Up to 32 index marks can be set within a DS2 file.
• Up to 16 index marks can be set within MP3 and
PCM files.
• When a file is locked or set to read-only, or when
the SD card is locked, index mark cannot be
erased.
• If the recorder has been set to DSS Classic mode,
index marks are limited to a maximum of 16 for
each file.
Index marks