Olympus SP-560 UZ - Manual (Page 46)

46
EN
Men
u o
perat
io
ns
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
•
TV video signal types by country/region. Check the video signal type before connecting the
camera to the TV.
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Press
DISP./E in shooting mode to determine the type of frame assist to be displayed.
Selecting [OFF] or when pressing
DISP./E will not display the frame assist.
Press
DISP./E in shooting mode to determine whether to display the histogram.
• When set to [DIRECT], the black (blue) and white (red) areas are displayed directly on the
picture.
VIDEO OUT ........................................................................ Playing back pictures on a TV
NTSC / PAL
NTSC : North America, Taiwan, Korea, Japan
PAL : European countries, China
FRAME ASSIST .................... Displaying the frame assist/Determining the type of frame assist
OFF /
w
/ x
u ............................................................................................
Displaying the histogram
OFF / ON / DIRECT
Connect to the TV’s video input (yellow) and
audio input (white) terminals.
AV cable (provided)
Connector cover
Settings on the camera
Press o in playback mode to turn the
camera on.
•
The last picture taken is displayed on the
TV. Use the arrow pad to select the picture
you want to display.
Settings on the TV
Turn the TV on, and set it to video input mode.
•
For details of switching to video input, refer to
your TV’s instruction manual.
• Images and the information displayed on the
screen may become cropped depending on the
TV’s settings.
Multi-connector
rame