BenQ Joybee 200 - Manual (Page 37)

31
7. Press to confirm your
selection.
To specify the default source signal when recording voice
files, do the following:
1. Turn on the Joybee 200.
2. Press the MODE button repeatedly to switch to
SETUP mode.
3. Use the or keys to
highlight REC Setting from
the menu and press the
key to confirm your
choice.
4. Use the or keys to high-
light Source in the menu and
press the
key to confirm
your choice.
5. Use the or keys to high-
light Mic In to record from the
microphone signal or select
Line in to record from the
external audio signal connected
to the LINE IN jack.
6. Press the key to con-
firm your choice.
7. Press the MODE button
repeatedly to return to Play-
back Mode. Record the voice
signal as described in "Using the recorder function"
on page 27.
SETUP
Set OK !
SETUP
REC Setting
REC Program
SETUP
Source
VOR
SETUP
MIC in
Line in
SETUP
Set OK !