Behringer DSP8024 - Manual (Page 32)

32
ULTRA-CURVE PRO DSP8024
ULTRA-CURVE PRO is switched off.
If you decide to replace the battery yourself please note that you will invalidate your warranty.
+
Disconnect the ULTRA-CURVE PRO from mains before opening the enclosure.
+
Warning: Danger of explosion when battery is placed incorrectly! Replace only with the same
type (see technical specifications). When replacing the battery, the correct polarity should be
observed.
+
Empty batteries are toxic waste and must be disposed of properly.
7.3 MIDI implementation
Function Transmitted Recognized Remarks
Basic Default X 1 - 16 memorized
Channel Changed X 1 - 16 -16
Default X 1,2,3,4
Mode Messages X X
Altered X X
Note X X
Number True Voice X X
Velocity Note ON X X
Note OFF X X
After Key’s X X
Touch Ch’s X X
Pitch Bender X X
Control offset of the first
Change O O controller adjustable
(refer to next table)
Progr.
Change True #
System Exclusive O O
System Song Pos X X
Song Sel X X
Common Tune X X
System Clock X X
Real Time Commands X X
Aux Local ON/OFF X X
All notes OFF X X
Messages Active Sense X X
Reset X X
Notes X X
O = YES
X = NO Mode 2: OMNI ON, MONO
Mode 3: OMNI OFF, POLY
Mode 4: OMNI OFF, MONO
1 - 100 0 - 99 0 - 99
Mode 1: OMNI ON, POLY
Tab. 7.1: MIDI implementation
7. APPENDIX