Bush Hog TOUGH 2010 Series - Manual

Bush Hog
®
TOUGH
2010 Series Rotary Cutters
BUSH HOG ® TOUGH FeaTUReS
TOUGH 5 Year Gearbox Limited Warranty
TOUGH 7 Gauge Sidebands
TOUGH Replaceable Wide Skids
TOUGH Cushioned axle arms
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 20
MOdeL 2010
Cutting Width 9 ft 9 inches
Cutting Capacity 2 inches
dimensions (width x length) 10 ft 3 inches x 9 ft 4 inches (Lift), 10 ft 3 inches x 13 ft (Pull)
Type Hitch 3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount Cat. II & III
Cutting Height 2 to 12 inches
deck Thickness 11 gauge
Side Bands 7 gauge x 10 inches
Minimum Tractor HP 40 PTO (Pull), 60 PTO (Lift)
driveline ASAE Category 4
Cross Shaft Rubber Element
Gearbox HP 120 Main and 90 Outboard
Tractor PTO Speed 540/1000 RPM
driveline Protection 4 Plate PTO Slip Clutch
Height adjustment Choice of Manual Height Bundle or Hydraulic Cylinder
Blade Holder(s) Round Pans
Blades 1/2 x 4 inches - Corner Uplift
Blade Tip Speed 15,778 FPM/540 RPM; 15,708 FPM/1000 RPM
Tires Laminated Tire on Lift and Semi-Mount Models, Laminted Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tires on Pull Type Only
axles Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
deflectors Standard Front Belting and Rear Bands (Chains Optional)
Safety Tow Chain Standard for Pull Models
approximate Weight 1922 lbs (Lift), 2177 lbs (Pull), 1929 lbs (Semi-Mount)
Options Single Row Chain Deflectors for Front and Rear
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
FeaTUReS •Rear Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields