Brother P-TOUCH 1900 - Manual (Page 32)

28
7 Hold the end of the stamp stencil film in place
with your thumb, and then pass the tape through
the guides while pulling it tight.
8 Fold the other end of the stamp stencil film over
the other side of the stamp film holder and hold it
in place with your finger.
9 Fit the stamp frame over the stamp stencil film and
push it into place.
0 Insert the stamp film holder straight into its cap.
☞ Be sure that the stamp is correctly covered in order
to prevent ink spills.
Guides
Fold over