Pioneer X-HM32VD-K - Manual (Page 14)

Connections 03
14
En
• This unit is designed for connection to HDMI-compatible
devices. It may not operate properly if connected to DVI
devices.
The term HDMI and High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing, LLC in the United States and other countries.
Audio signals that can be output from
this unit’s HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Connecting antennas
Connect the DAB/FM antenna plug onto the center pin of the
DAB/FM antenna socket.
Note
• To ensure optimum reception, make sure the DAB/FM
antenna is fully extended and not coiled or hanging at
the rear of the unit.
OUT COMPONENT
VIDEO
OUT
I
L
P B
P R R
HDMI
L
Match the direction of
the plug to the
terminal and insert
straight.
To HDMI input
terminal
HDMI cable
(commercially
available)
TV
This unit’s rear panel
ANTENNA
COMPONENT
VIDEO
OUT
IN
LINE
P B
P R
Y
L
R
DAB/FM
This unit’s rear panel
DAB/FM wire antenna
(supplied)
X-HM32VD_VXE8_En.book 14 ページ ２０１４年３月２８日 金曜日 午後２時１９分