Pioneer AVH-P7500DVD - Manual (Page 98)

Adjusting the LCD panel
slide position
To adjust the LCD panel slide position, you can
turn the set back on or off.
1 Touch A.MENU and SETUP and then
touch FLAP SET BACK.
2 Touch a to turn the set back on, and
the LCD panel slides to the back.
# To turn the set back off, touch b and the LCD
panel slides to the front.
Setting the video of rear
display
You can select either showing the same
source as the front display or showing the
video source on rear display independently.
! When selecting FRONT SOURCE in
REAR MODE, when the selected source is
an audio source, nothing is displayed on
rear display.
! When selecting FRONT SOURCE in
REAR MODE, audio is not output from
REAR MONITOR OUT.
! When selecting FRONT SOURCE in
REAR MODE, nothing is displayed on rear
display during a traffic announcement in-
terruption or a news program interruption.
1 Touch A.MENU and SETUP and then
touch REAR MODE.
2 Touch either of the following touch
panel keys to select the video on rear dis-
play.
! FRONT SOURCE  Display the same source
as the front display
! SEPARATE  Display the video source on
rear display independently of front dis-
play
Displaying the navigation
video on rear display
When the navigation video is displayed on
front display, you can select either showing
the navigation video on rear display or the
video of the selected source.
! Only when a Pioneer navigation unit is con-
nected to this unit, you can operate this
function.
1 Touch A.MENU and SETUP and then
touch NEXT.
2 Touch REAR NAVIMAP.
3 Touch a to display the navigation
video on rear display.
# Touch b to display the video of the selected
source on rear display.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.
Selecting AUX as the source
% Touch the source icon and then touch
AUX to select AUX as the source.
# When the source icon is not displayed, you
can display it by touching the screen.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 94.
Other Functions
En
98
Section
19