Pioneer XW-NAV1-K - Manual (Page 30)

Using the timer 11
30
En
Turning the wake-up timer on/off
1 With the power turned ON, press
TIMER/CLOCK.
The current time is displayed on the front panel
display.
2 Press TIMER/CLOCK three times.
The newly set value displays for 5 seconds on
the front panel.
3 Press ENTER to select ‘ ’ or
‘ ’.
The newly set value displays for 5 seconds, and
then the setting is completed.
– The wake-up timer is set to on.
– The wake-up timer is set to off.
Using the wake-up timer
1 Set the wake-up timer to on, and connect
iPod/iPhone or USB storage device or slot a
disc.
2 Press FUNCTION to select the input
function that this unit plays when the wake-
up timer works.
3 Press  STANDBY/ON to turn the power
off.
4 At the wake-up time, this unit will be
turned on automatically, and this unit will
play on the selected input function.
If this unit is not operated for 60 minutes or
more after playback is started by the wake-up
timer, power will automatically turn OFF
(standby mode).
Note
• If at the wake-up time iPod/iPhone or USB
storage device is not connected to this unit
or a disc is not slotted, this unit will be
turned to on and not play back the track.
• Some discs may not be played
automatically at the wake-up time.
Using the sleep timer
The sleep timer switches off the unit after a
specified time so you can fall asleep without
worrying about it.
• Press SLEEP repeatedly to select a switch
off time.
Choose between 5 min, 15 min, 30 min, 60 min,
90 min or Off.
The newly set value displays for 3 seconds, and
then the setting is completed.
• If you press SLEEP while the sleep timer is
set, the remaining time will be displayed. 1
Note
1 The sleep timer can be set by pressing SLEEP while the remaining time is displayed.
XW-NAV1_SYXJ.book 30 ページ ２０１０年４月２０日 火曜日 午前１１時４分