Pioneer BCS-FS505 - Manual (Page 25)

25 Installation
3
Installation
Bluetooth® connection
About
Bluetooth
Bluetooth® is wireless communication
technology for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic
wave or you connect the
bluetooth in the other
rooms.)
Connecting individual devices under
Bluetooth wireless technology does not incur
any charges. A mobile phone with
Bluetooth
wireless technology can be operated via
the Cascade if the connection was made via
Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo
Headset.)
Bluetooth Profi les
In order to use
Bluetooth wireless technology,
devices must be able to interpret certain
profi les.
This unit is compatible with following profi le.
A2DP (Advanced Audio Distribution Profi le)
Listening to music of a
Bluetooth
device
Pairing your unit and
Bluetooth device
Before you start the pairing procedure, make
sure the
Bluetooth feature is turned on in to
your
Bluetooth device. Refer to your Bluetooth
device’s user guide. Once a pairing operation is
performed, it does not need to be performed
again.
1. Select the
Bluetooth function by using the
INPUT/TUNER or BT AUDIO.
Appears “BT AUDIO” and then “BT READY” in
display window.
2. Operate the
Bluetooth device and perform
the pairing operation. When searching for
this unit with the
Bluetooth device, a list
of the devices found may appear in the
Bluetooth device display depending on the
type of
Bluetooth device. Your unit appears
as “PIONEER AUDIO”.
3. Enter the PIN code.
PIN cord : 0000
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “BT SINK”.
NOTE
Depending on the
Bluetooth device type, some
device have a diff erent pairing way.
5. Listening to music.
To play a music stored on your
Bluetooth
device, refer to your
Bluetooth device’s user
guide.
NOTE
• If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
• AVRCP cannot be available in this mode.
HB485-DB.BGBRPPK.indd 25 HB485-DB.BGBRPPK.indd 25 2010-05-14 9:43:40 2010-05-14 9:43:40