What’s in the box, Putting the batteries in the remote control, Using the remote control – Pioneer DV-360-S User Manual

Page 7: Before you start 01

Advertising
background image

Before you start

01

7

En

What’s in the box

Please confirm that the following accessories
are in the box when you open it.

• Remote control

• AA/R6P dry cell batteries x2

• Audio/video cable (red/white/yellow

plugs)

• Power cable

• Operating instructions

• Warranty card

Putting the batteries in the
remote control

Incorrect use of batteries can result in
hazards such as leakage and bursting. Please
observe the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,
different batteries may have different volt-
ages.

• Make sure that the plus and minus ends

of each battery match the indications in
the battery compartment.

• Remove batteries from equipment that

isn’t going to be used for a month or
more.

• When disposing of used batteries, please

comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.

H048 En

1

Open the battery compartment cover

on the back of the remote control.

2

Insert two AA/R6P batteries into the

battery compartment following the indi-
cations (

,

) inside the compartment.

3

Close the cover.

Using the remote control

Keep in mind the following when using the
remote control:

• Make sure that there are no obstacles

between the remote and the remote
sensor on the unit.

• The remote has a range of about 7m.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.

• Remote controllers for different devices

can interfere with each other. Avoid using
remotes for other equipment located
close to this unit.

DV260.book 7 ページ 2002年12月27日 金曜日 午後8時58分

Advertising
This manual is related to the following products: