Pioneer SPH-DA01 - Manual (Page 10)

Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 V to 14.4 V DC)
Earthing system ....................... Negative type
Maximum current consumption
........................................... 12.0 A
Dimensions (W × H × D):
DIN
Chassis ............................... 188 mm × 118 mm ×
157 mm
Nose ..................................... 171 mm × 97 mm × 27 mm
D
Chassis ............................... 178 mm × 100 mm ×
165 mm
Nose ..................................... 171 mm × 97 mm × 19 mm
Weight .......................................... 1.45 kg
Display
Screen size/aspect ratio ....... 6.1 inch wide/16:9
(effective display area:
136.2 mm × 72 mm)
Pixels ............................................. 384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Colour system ........................... PAL/NTSC compatible
Tolerable temperature range:
Power on ............................
–10 °C to +60 °C
Power off ............................ –20 °C to +70 °C
Audio
Maximum power output ....... 50 W × 4
50 W × 2 ch/4
W + 70 W ×
1 ch/2
W (for subwoofer)
Continuous power output ... 15 W × 4 (FM, 1 %THD, 4 W
LOAD)
Load impedance ...................... 4
W (4 W to 8 W [2 W for 1 ch]
allowable)
Preout output level (max) .... 2.0 V
Preout impedance .................. 100
W
Equaliser (3-Band Parametric Equaliser):
Frequency
Low ............................. 60 Hz/80 Hz/100 Hz/200 Hz
Mid ............................. 500 Hz/1 kHz/1.5 kHz/2.5 kHz
High ........................... 10 kHz/12.5 kHz/15 kHz/
17.5 kHz
Gain ...................................... ±15 dB
Subwoofer:
Frequency .......................... 80 Hz/120 Hz/160 Hz
Gain ...................................... ±12 dB
USB
USB standard spec. ............... USB 1.1 Full Speed
Max current supply ................. 1 A
USB class .................................... for iPhone only
Bluetooth
Version .......................................... Bluetooth 2.1+EDR
Output power ............................ +0 dBm Max.
FM tuner
Frequency range ...................... 87.5 MHz to 108.0 MHz
Usable sensitivity ..................... 17 dBf (0.8 µV/75
W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
Distortion ..................................... 1.3 % (at 65 dBf, 1 kHz,
stereo)
0.3 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 100 Hz to 10 000 Hz (+2 dB/
–13 dB)
Stereo separation .................... 31 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ...................... 532 kHz to 1 602 kHz (9 kHz)
Usable sensitivity ..................... 32 dBµV (S/N: 20 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 34 dBµV (S/N: 20 dB)
Signal-to-noise ratio ............... 57 dB (IEC-A network)
GPS
GPS receiver:
System ................................ L1, C/Acode GPS
Reception system .......... 22 tracking/66 acquisition-
channel system
Reception frequency .... 1 575.42 MHz
Tracking sensitivity ........
–165 dBm (typ)
Frequency .......................... Max. 10 a second (10 Hz)
GPS aerial:
Aerial ................................... Micro strip flat aerial/right-
handed helical polarisation
Aerial cable ...................... 3.0 m
Dimensions (W × H × D)
........................................... 50.6 mm × 15.5 mm ×
50.6 mm
Weight ................................ 85 g
SD
microSD card, microSDHC card
Compatible physical format
..................................................... Version 2.00
File system .................................. FAT16, FAT32
Decoding format ...................... Software Update only
Note
Specifications and design are subject to possible
modifications without notice due to im-
provements.
Engb
10
Appendix
Appendix