Pioneer DV-510K-S - Manual (Page 44)

09
44
En
Setting the TV system
(Except Taiwanese model)
The default setting of this player is
AUTO , and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO . If you experience picture
distortion with some discs, set the TV system
to match your country or region’s system.
Doing this, however, may restrict the kinds of
disc you can watch. The table below shows
what kinds of disc are compatible with each
setting (
AUTO , NTSC and PAL ).
1 If the player is on, press  STANDBY/
ON to switch it to standby.
2 Using the front panel controls, hold
down  then press  STANDBY/ON to
switch the TV system.
The TV system changes as follows:
• AUTO

NTSC
• NTSC

PAL
• PAL  AUTO
Note
• You have to switch the player into standby
(press  STANDBY/ON) before each
change.
Resetting the player
Use this procedure to reset all the player’s
settings to the factory default.
1 Switch the player into standby.
2 Using the front panel buttons, hold
down the  (stop) button and press
 STANDBY/ON to switch the player back
on.
All the player’s settings are now reset.
DVD-Video regions
All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. In this case the attention sentence
Incompatible disc region number Can’t play
disc
is displayed on screen. Discs marked ALL
will play in any player. The diagram below
shows the various DVD regions of the world.
Selecting languages using
the language code list
Some of the language options (such as ‘DVD
Menu Lang.’ in the Initial Settings) allow you
to set your preferred language from any of the
136 languages listed in the language code list
on page 50.
1 Select ‘Other Language’.
2 Use the / (cursor left/right)
buttons to select either a code letter or a
code number.
3 Use the
/ (cursor up/down) buttons
to select a code letter or a code number.
See Language code list on page 50 for a
complete list of languages and codes.
Disc Type
Player setting
Format NTSC PAL AUTO
DVD/
Super VCD/
Video CD/
DivX video/
WMV NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
CD/MP3/
WMA/
MPEG-4 AAC
/JPEG
no disc
— NTSC PAL
NTSC
or PAL
1
2
2
5
5
6
3
2
1
4
4
DV510K_IBD_EN.book 44 ページ ２００８年３月２８日 金曜日 午前１１時５４分