Using the sleep timer using headphones, Getting started 04, Using the sleep timer – Pioneer X-HM21-K User Manual

Page 14: Using headphones, Calling the wake-up timer, Cancelling the wake-up timer, Using the wake-up timer

Advertising
background image

Getting started

04

14

En

Calling the wake-up timer

An existing timer setting can be reused.

1

Follow steps 1 to 3 in “Setting the wake-up

timer”.

2

Press

HI to select “TIMER ON”, then press

ENTER.

Cancelling the wake-up timer

Turn off the timer setting.

1

Follow steps 1 to 3 in “Setting the wake-up

timer”.

2

Press

HI to select “TIMER OFF”, then

press ENTER.

Using the wake-up timer

1

Press

1 STANDBY/ON to turn the power

off.

2

At the wake-up time, this unit will turn on

automatically and play the selected input
function.

Note

• If at the wake-up time an iPod/iPhone/iPad is not

connected to the unit or a disc is not inserted, the unit
will be turned on but will not play back the track.

• Some discs may not be played automatically at the wake-

up time.

• When setting the timer set at least one minute between

the start and end time.

Using the sleep timer

The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.

1

Press SLEEP repeatedly to select a switch off

time.

Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120
min, 150 min, 180 min or OFF. The newly set value displays for
3 seconds, and then the setting is completed.

Note

• The sleep timer can be set by pressing

SLEEP while the

remaining time is displayed.

Using Headphones

Insert the headphone’s jack plug into the connector.

When the headphones are connected, there is no sound
output from the speakers.

• Do not turn the volume on to full at switch on and listen

to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.

• Before plugging in or unplugging the headphone,

reduce the volume.

• Be sure your headphone has a 3.5 mm diameter plug

and impedance between 16

:

and 50

:

. The

recommended impedance is 32

:

.

• Audio from the iPod/iPhone/iPad cannot be heard via

the headphones connected to the unit. “HP MUTE” will
be displayed if you connect the headphones when the
iPod/iPhone/iPad function is selected.

 STANDBY/ON

INPUT

VOLUME

PHONES

AUDIO IN





TIMER

X-HM21

Advertising
This manual is related to the following products: