Pioneer SC-LX77-K - Manual (Page 64)

64
06
Listening to your system
Using the Full Band Phase Control’s FRONT ALIGN function
Full Band Phase Control calibrates frequency phase disturbances (group delay) for the full speaker band (Full
Band) (SYMMETRY), but with this unit it is also possible to calibrate the frequency phase characteristics of other
speakers to the frequency phase characteristics of the front speakers (FRONT ALIGN).
Full Band Phase Control calibration can be performed in the FRONT ALIGN mode by making the settings and
performing the operations below.
1 Perform Full Band Phase Control measurements with the Full Auto MCACC (or Auto
MCACC) procedure.
2 Perform measurements with EQ Type set to FRONT ALIGN with the Full Auto MCACC (or
Auto MCACC) procedure.
3 Press the MCACC button to select the MCACC memory at which the measurements
performed with EQ Type set to FRONT ALIGN are stored.
4 Turn Full Band Phase Control on.
! Full Band Phase Control does not turn on with listening modes in which sound is only played on the front
speakers or the front speakers and subwoofer.