Connection – Pioneer S-HS100 User Manual

Page 9

Advertising
background image

English

Français

Deutsch

Nederlands

Italiano

Español

Pyccкий

9

En

Rear panel

1 Power Indicator

When the power is turned ON, the indicator
changes from flashing to steadily lighted
blue. In the standby mode, the indicator
lights red.

• The power is still supplied even when the

power indicator is off. The power plug
(interrupter) must be unplugged in order to
completely cut the power supply. When not
using this product for long periods of time,
such as when traveling, unplug the power
cord (interrupter) from the power outlet for
safety purposes. Failure to do so could lead
to fire.

2 Volume knob (MIN/MAX)

• Sets the subwoofer volume.
• With this unit, the bass level can be

independently set, so do not turn up the
bass on the receiver.

• The volume knob is factory set at the MIN

position.

3 Line Level Input terminal (LINE IN)
4 Auto Standby switch (AUTO STANDBY)

• Turning the Auto Standby function on or

off.

• The default setting for AUTO STANDBY

switch is ON.

Auto standby function

When there is no (or only very weak) input
signal for a period of about ten minutes, the
power mode automatically changes to
standby (power indicator lights red). The
power automatically turns on when a signal is
input. The auto standby function is
deactivated when AUTO STANDBY switch is
set to OFF.

• There may be cases where a connected

component outputs noise or some other
non-audio signal which causes the
subwoofer to automatically power on when
in Auto Standby mode. If this happens,
switch off the Auto Standby mode and
switch the subwoofer on/off manually.

5 Power switch (POWER)

• Switches the subwoofer between ON

and OFF.

6 AC IN

• Connect the power cord to a AC socket.

Connection

Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.

Line level connection

Connect the set’s

LINE IN terminal to the

receiver’s

SUBWOOFER PREOUT terminal

using the included RCA plug cord.

• When connected to the

PREOUT terminal

for surround center channel on the
receiver, the bass is heard only on the
center channel, so it will be insufficient.

4

3

5

2

6

MIN

ON

MAX

LINE IN

AUTO STANDBY

ON

POWER

AC IN

Supplied RCA plug cord

Rear Panel

01_S-21W&S-11.book 9 ページ 2010年3月16日 火曜日 午前11時28分

Advertising
This manual is related to the following products: